--
-- Juniper Enterprise Specific MIB: Vlan
--
-- Copyright (c) 2007-2008, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--JUNIPER-VLAN-MIB DEFINITIONS::=BEGINIMPORTSInteger32,IpAddress,OBJECT-TYPE,MODULE-IDENTITYFROM SNMPv2-SMI
MacAddress,TruthValue,DisplayStringFROM SNMPv2-TC
InterfaceIndexFROM IF-MIB
InetAddress,InetAddressType,InetAddressPrefixLength
FROM INET-ADDRESS-MIB
jnxExVlan
FROM JUNIPER-EX-SMI;jnxVlanMIBObjects MODULE-IDENTITYLAST-UPDATED"200708290000Z"ORGANIZATION"Juniper Networks, Inc."CONTACT-INFO"Juniper Technical Assistance Center
Juniper Networks, Inc.
1194 N. Mathilda Avenue
Sunnyvale, CA 94089
E-mail: support@juniper.net"DESCRIPTION"This module contains definitions for management information for
pre-standards IEEE 802.1Q VLANs and their association with a Lan
Emulation Client (lec). Devices implementing these pre-standards
maintain port groupings and associated filters used to form a
'virtual bridge'."::={ jnxExVlan 1}--------------------------------------------------------------------------------
-- VLAN Configuration
--------------------------------------------------------------------------------jnxVlanTable OBJECT-TYPESYNTAXSEQUENCEOF JnxVlanEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"A table of VLAN names and characteristics."::={ jnxVlanMIBObjects 1}jnxVlanEntry OBJECT-TYPESYNTAX JnxVlanEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"A table entry containing VLAN names and characteristics."INDEX{IMPLIED jnxVlanName }::={ jnxVlanTable 1}
JnxVlanEntry ::=SEQUENCE{
jnxVlanName DisplayString,
jnxVlanID Integer32,
jnxVlanType INTEGER,
jnxVlanPortGroupInstance Integer32,
jnxVlanMacListInstance Integer32}jnxVlanName OBJECT-TYPESYNTAXDisplayString(SIZE(1..255))MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"Vlan name is the textual name and this is the identifier
that the user of a configuration utility will use."::={ jnxVlanEntry 1}jnxVlanID OBJECT-TYPESYNTAXInteger32(1..4094)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This is the locally significant ID that is used internally by this
device to reference this VLAN."::={ jnxVlanEntry 2}jnxVlanType OBJECT-TYPESYNTAXINTEGER{static (1),dynamic(2)}MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The valn type can be
static (1)
Dynamic(2)"DEFVAL{1}::={ jnxVlanEntry 3}jnxVlanPortGroupInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"jnxVlanPortGroupInstance is the index that identifies that the sub
tree in the jnxVlanPortGroupTable helps to retrieve the group of
ports in this VLAN."::={ jnxVlanEntry 4}jnxVlanMacListInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"jnxVlanMacListInstance is the index , if this is a MAC-based VLAN
which identifies the sub tree to retrieve the list of MAC address to
allow into this VLAN. If this is not a MAC-based VLAN then the
value is 0"DEFVAL{0}::={ jnxVlanEntry 5}jnxVlanInterfaceTable OBJECT-TYPESYNTAXSEQUENCEOF JnxVlanInterfaceEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"A table of VLAN names and characteristics in layer 3."::={ jnxVlanMIBObjects 2}jnxVlanInterfaceEntry OBJECT-TYPESYNTAX JnxVlanInterfaceEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION
"A table entry containing VLAN names and characteristics in layer 3."INDEX{IMPLIED jnxVlanName }::={ jnxVlanInterfaceTable 1}
JnxVlanInterfaceEntry ::=SEQUENCE{
jnxVlanInterfaceIpAddress InetAddress,
jnxVlanInterfaceProtocol InetAddressType,
jnxVlanInterfaceSubNetMask IpAddress,
jnxVlanInterfaceBroadcastAddress IpAddress,
jnxVlanInterfaceDescription DisplayString,
jnxVlanInterfaceAdminStatus TruthValue,
jnxVlanInterfaceOperStatus DisplayString,
jnxVlanSnmpIfIndex InterfaceIndex}jnxVlanInterfaceIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This specifies the IPAddress of this interface. "::={ jnxVlanInterfaceEntry 1}jnxVlanInterfaceProtocol OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This specifies the protocol for ipv4."::={ jnxVlanInterfaceEntry 2}jnxVlanInterfaceSubNetMask OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUSdeprecated
DESCRIPTION"This specifies the subnet mask address of the vlan ."::={ jnxVlanInterfaceEntry 3}jnxVlanInterfaceBroadcastAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This specifies the broadcast address of the vlan."::={ jnxVlanInterfaceEntry 4}jnxVlanInterfaceDescription OBJECT-TYPESYNTAXDisplayString(SIZE(1..255))MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"jnxvlanInterfaceDescription provides the description for the vlan."::={ jnxVlanInterfaceEntry 5}jnxVlanInterfaceAdminStatus OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This takes care of administration status of the vlan"::={ jnxVlanInterfaceEntry 6}jnxVlanInterfaceOperStatus OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This specifies the operational status of the vlan"::={ jnxVlanInterfaceEntry 7}
jnxVlanSnmpIfIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This specifies the SNMP IF Index ."::={ jnxVlanInterfaceEntry 8}-------------------------------------------------------------------------------
-- Port Group Table
--------------------------------------------------------------------------------jnxVlanPortGroupTable OBJECT-TYPESYNTAXSEQUENCEOF JnxVlanPortGroupEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"A table of port groupings."::={ jnxVlanMIBObjects 3}jnxVlanPortGroupEntry OBJECT-TYPESYNTAX JnxVlanPortGroupEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"A table entry containing a port number"INDEX{ jnxVlanPortGroupIndex, jnxVlanPort }::={ jnxVlanPortGroupTable 1}
JnxVlanPortGroupEntry ::=SEQUENCE{
jnxVlanPortGroupIndex Integer32,
jnxVlanPort Integer32,
jnxVlanPortStatus INTEGER}jnxVlanPortGroupIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION
"Index used so that there can be many different
port groups"::={ jnxVlanPortGroupEntry 1}jnxVlanPort OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"The vlanPort specifies the port in the vlan.By adding a port here,
that port will now be part of any VLAN(s) that this port group is
associated with."::={ jnxVlanPortGroupEntry 2}jnxVlanPortStatus OBJECT-TYPESYNTAXINTEGER{autoActive (1),allowed (2),allowedActive (3),allowedNotAvail (4),notAssociated (5)}MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The status of this port relative to the VLAN that points
at this port group.[1.autoactive , 2.allowed, 3.allowedActive
4.allowedNotAvail, 5.notAssociated]
autoActive : Means that the port is part of this VLAN
because the switch automatically added it.
allowed : Means that the port has been configured so that
if all other criteria (if any) are met, this port
is allowed to be in this VLAN.
allowedActive : Means the same as allowed plus the fact
that there is a device attached to this port and
participating in the VLAN.
allowedNotAvail: This value is only needed for devices
that don't allow a port to be in more than one
VLAN at a time. This value means that this port
also exists in some other VLAN(s) and is active
in another VLAN. Therefore this port is not
available to be used in this VLAN.
notAssociated : Means that the Port Group is not currently
associated with any VLAN."DEFVAL{ allowed }::={ jnxVlanPortGroupEntry 3}--------------------------------------------------------------------------------
-- MAC List Table
--------------------------------------------------------------------------------jnxVlanMacListTable OBJECT-TYPESYNTAXSEQUENCEOF JnxVlanMacListEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"jnxVlanMacListTable is the table of MAC Lists. "::={ jnxVlanMIBObjects 4}jnxVlanMacListEntry OBJECT-TYPESYNTAX JnxVlanMacListEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table entry containing MAC Addresses"INDEX{ jnxVlanMacListIndex }::={ jnxVlanMacListTable 1}
JnxVlanMacListEntry ::=SEQUENCE{
jnxVlanMacListIndex Integer32,
jnxVlanMacAddress MacAddress}jnxVlanMacListIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"jnxVlanMacListIndex can be used beacuse there can be many different
MAC Lists"::={ jnxVlanMacListEntry 1}jnxVlanMacAddress OBJECT-TYPESYNTAXMacAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"jnxVlanMacAddress is the MAC Address that belongs to this group."::={ jnxVlanMacListEntry 2}--------------------------------------------------------------------------------
-- Ex VLAN Configuration
--------------------------------------------------------------------------------jnxExVlanTable OBJECT-TYPESYNTAXSEQUENCEOF JnxExVlanEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table of VLAN names and characteristics."::={ jnxVlanMIBObjects 5}jnxExVlanEntry OBJECT-TYPESYNTAX JnxExVlanEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table entry containing VLAN names and characteristics."INDEX{ jnxExVlanID }::={ jnxExVlanTable 1}
JnxExVlanEntry ::=SEQUENCE{
jnxExVlanID Integer32,
jnxExVlanName DisplayString,
jnxExVlanType INTEGER,
jnxExVlanPortGroupInstance Integer32}
jnxExVlanID OBJECT-TYPESYNTAXInteger32(1..4094)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This is the locally significant ID that is used internally by this
device to reference this VLAN."::={ jnxExVlanEntry 1}jnxExVlanName OBJECT-TYPESYNTAXDisplayString(SIZE(1..255))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Vlan name is the textual name."::={ jnxExVlanEntry 2}jnxExVlanType OBJECT-TYPESYNTAXINTEGER{static (1),dynamic(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vlan type can be
static (1)
Dynamic(2)"DEFVAL{1}::={ jnxExVlanEntry 3}jnxExVlanPortGroupInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"jnxExVlanPortGroupInstance is the index that identifies that the sub
tree in the jnxVlanPortGroupTable helps to retrieve the group of
ports in this VLAN."::={ jnxExVlanEntry 4}--------------------------------------------------------------------------------
-- Ex VLAN Interface Table
--------------------------------------------------------------------------------jnxExVlanInterfaceTable OBJECT-TYPESYNTAXSEQUENCEOF JnxExVlanInterfaceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table of VLAN names and characteristics in layer 3."::={ jnxVlanMIBObjects 6}jnxExVlanInterfaceEntry OBJECT-TYPESYNTAX JnxExVlanInterfaceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table entry containing VLAN names and characteristics in layer 3."INDEX{ jnxExVlanID }::={ jnxExVlanInterfaceTable 1}
JnxExVlanInterfaceEntry ::=SEQUENCE{
jnxExVlanInterfaceProtocol InetAddressType,
jnxExVlanInterfaceIpAddress InetAddress,
jnxExVlanInterfacePrefixLength InetAddressPrefixLength,
jnxExVlanInterfaceBroadcastAddress InetAddress,
jnxExVlanInterfaceDescription DisplayString,
jnxExVlanInterfaceAdminStatus INTEGER,
jnxExVlanInterfaceOperStatus INTEGER,
jnxExVlanSnmpIfIndex InterfaceIndex
}jnxExVlanInterfaceProtocol OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This specifies the protocol for ipv4."::={ jnxExVlanInterfaceEntry 1}jnxExVlanInterfaceIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This specifies the IPAddress of this interface. "::={ jnxExVlanInterfaceEntry 2}jnxExVlanInterfacePrefixLength OBJECT-TYPESYNTAXInetAddressPrefixLengthMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This specifies the length of subnet mask address of the vlan ."::={ jnxExVlanInterfaceEntry 3}jnxExVlanInterfaceBroadcastAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This specifies the broadcast address of the vlan."::={ jnxExVlanInterfaceEntry 4}jnxExVlanInterfaceDescription OBJECT-TYPESYNTAXDisplayString(SIZE(1..255))MAX-ACCESSread-only
STATUScurrentDESCRIPTION"jnxExvlanInterfaceDescription provides the description for the vlan."::={ jnxExVlanInterfaceEntry 5}jnxExVlanInterfaceAdminStatus OBJECT-TYPESYNTAXINTEGER{up(1),-- ready to pass packetsdown(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This takes care of administration status of the vlan"::={ jnxExVlanInterfaceEntry 6}jnxExVlanInterfaceOperStatus OBJECT-TYPESYNTAXINTEGER{up(1),-- ready to pass packetsdown(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This specifies the operational status of the vlan"::={ jnxExVlanInterfaceEntry 7}jnxExVlanSnmpIfIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This specifies the SNMP IF Index ."::={ jnxExVlanInterfaceEntry 8}
-------------------------------------------------------------------------------
-- Ex Port Group Table
--------------------------------------------------------------------------------jnxExVlanPortGroupTable OBJECT-TYPESYNTAXSEQUENCEOF JnxExVlanPortGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table of port groupings."::={ jnxVlanMIBObjects 7}jnxExVlanPortGroupEntry OBJECT-TYPESYNTAX JnxExVlanPortGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table entry containing a port number"INDEX{ jnxExVlanPortGroupIndex, jnxExVlanPort }::={ jnxExVlanPortGroupTable 1}
JnxExVlanPortGroupEntry ::=SEQUENCE{
jnxExVlanPortGroupIndex Integer32,
jnxExVlanPort Integer32,
jnxExVlanPortStatus INTEGER}jnxExVlanPortGroupIndex OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index used so that there can be many different
port groups"::={ jnxExVlanPortGroupEntry 1}jnxExVlanPort OBJECT-TYPESYNTAXInteger32(1..65535)
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The vlanPort specifies the port in the vlan.By adding a port here,
that port will now be part of any VLAN(s) that this port group is
associated with."::={ jnxExVlanPortGroupEntry 2}jnxExVlanPortStatus OBJECT-TYPESYNTAXINTEGER{autoActive (1),allowed (2),allowedActive (3),allowedNotAvail (4),notAssociated (5)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The status of this port relative to the VLAN that points
at this port group.[1.autoactive , 2.allowed, 3.allowedActive
4.allowedNotAvail, 5.notAssociated]
autoActive : Means that the port is part of this VLAN
because the switch automatically added it.
allowed : Means that the port has been configured so that
if all other criteria (if any) are met, this port
is allowed to be in this VLAN.
allowedActive : Means the same as allowed plus the fact
that there is a device attached to this port and
participating in the VLAN.
allowedNotAvail: This value is only needed for devices
that don't allow a port to be in more than one
VLAN at a time. This value means that this port
also exists in some other VLAN(s) and is active
in another VLAN. Therefore this port is not
available to be used in this VLAN.
notAssociated : Means that the Port Group is not currently
associated with any VLAN."DEFVAL{ allowed }::={ jnxExVlanPortGroupEntry 3}END